ESX-8MD mk2 announced

We’re happy to announce the ESX-8MD mk2, an updated version of the MIDI/DINsync expander for the ES-40/ES-5.

Whereas the original ESX-8MD was sometimes incompatible with certain MIDI devices when running at a 44.1kHz sample rate, the mk2 is guaranteed to operate with all MIDI devices, at all sample rates.

The ESX-8MD mk2 is expected to be available in December 2014. Pricing unchanged.

ESX-8MD, frontESX-8MD

New module: ESX-8MD

The ESX-8MD MIDI/DINsync Expander is now available.

The ESX-8MD is an expansion module for the ES-4, ES-40 or ES-5, adding eight MIDI/DINsync outputs from one expansion header.

The ES-4/5 Controller software (part of Expert Sleepers Silent Way) allows the ESX-8MD outputs to be used for MIDI output (note - not just MIDI clock output, but as an actual MIDI port, capable of sending any MIDI messages). Since these outputs are driven from an audio connection, they have sample-accurate timing, which no USB MIDI interface can claim.

The Silent Way Sync plug-in would typically be used to send DINsync to the ESX-8MD, though any software capable of addressing the ES-4/5's expansion headers, via Silent Way or the Max/MSP external, can send clock pulses to it.

See the ‘where to buy’ page for purchasing information.


Expert Sleepers workshop at London Modular

On December 7th Expert Sleepers conducted a workshop at the London Modular showroom.

We videoed it, but sadly this is a single static camera pointed at the presenter - no close-up view of the modular or screencast from the laptop. Still, if you want a general spoken overview of the Expert Sleepers software and hardware, as a change from reading specs or reviews, you could do worse than watch some of this.

Part 1 covers most aspects of the Silent Way software that do not specifically require Expert Sleepers hardware. A MOTU Ultralite audio interface is used to drive the modular for all the demos in this video.

Part 2 moves on to cover the Expert Sleepers hardware.