Augustus Loop v2.5.1 (Windows) released

Augustus Loop v2.5.1 is released. This is a Windows-only update, which fixes an audio fidelity issue when changing the tape speed.

Download here.

disting mk4 firmware v1.14 released

Version 4.14 of the disting mk4 firmware is now released. This update contains two new algorithms, some small feature additions, and some bug fixes.

Download the new firmware from here.




ES-9 now shipping

The new ES-9 is in stores now.



New module - ES-9 announced

We're delighted to announce a new Eurorack module - the ES-9.


The ES-9 is a Eurorack 16-in/16-out USB audio interface, with DC-coupled inputs and outputs that can be used for both audio and CVs.

With its balanced 1/4" main outputs & headphone socket, it's the perfect one-stop solution for integrating a modular synth and a laptop/tablet, either in the studio or when playing out at a gig.

Join us at Signal Sounds for a launch event on September 26th and at Synthfest UK on October 5th for a first public appearance. The module should be in stores early October.

disting mk4 firmware v4.13 released

Version 4.13 of the disting mk4 firmware is now released. This update contains two new algorithms, a major revamp of the Chorus algorithms, and some bug fixes.

Download the new firmware from here.





disting mk4 firmware v4.12 released

Version 4.12 of the disting mk4 firmware is now released. This update contains two new algorithms, and support for loop markers (aka cue points) in WAV files.

Download the new firmware from here.





FH-2 firmware v1.7 released

Version 1.7 of the FH-2 firmware is now released. This version features some important enhancements, including smoother update of LFOs and envelopes.

Download the new firmware from here.

disting mk4 firmware v4.11 released

Version 4.11 of the disting mk4 firmware is now released. This update contains two new algorithms, and a large number of enhancements - plus a few bug fixes.

Download the new firmware from here.




FH-2 firmware v1.6 released

Version 1.6 of the FH-2 firmware is now released. Additions include CV/MIDI conversion and enhanced LFOs with retriggering and fades.

Download the new firmware from here.

Augustus Loop v2.4.12 released

Augustus Loop v2.4.12 is released. Changes in this version:

* Fixed a bug where the knob orientation would not initialise properly when opening the UI.
* Fixed a possible audio click when using the AutoClr2 option.
* Fixed a problem where very long envelopes would not be completely smooth.

Download here.

Silent Way for VCV Rack released

Silent Way for VCV Rack is now available - a set of modules for integrating hardware synths with Rack's virtual world, based on key elements of our popular Silent Way plug-in suite.

It can be downloaded from the Rack plug-in manager in the usual way.

New module: 'Little Mikey' released

We're delighted to announce the release of a new Eurorack module - the 'Little Mikey'.

Expert Sleepers Little MikeyExpert Sleepers Little Mikey

Little Mikey is a mic/instrument pre-amp in an 8HP Eurorack module, providing up to 60dB of exceptionally clean gain.

It will provide 48V phantom power to condenser microphones and other phantom-powered equipment, and has a high impedance input option allowing direct connection of e.g. electric guitars.

Available immediately from all good modular stores.

VCV Rack encoders plug-in released

We're delighted to announce that a plug-in is now available for VCV Rack to allow direct use of the ES-40, ES-5, ESX-8GT and ESX-8CV from within Rack itself.

The plug-in can be downloaded from the Rack plug-in manager in the usual way. It's free (as in beer).



disting mk4 firmware v4.10 released

Version 4.10 of the disting mk4 firmware is now released. This update contains a number of new algorithms, including new SD card-based delays offering extremely long delay times.

Download the new firmware from here.






FH-2 firmware v1.5 released

Version 1.5 of the FH-2 firmware is now released. This adds a number of features frequently requested by users, as well as some bug fixes.

Download the new firmware from here.

We use cookies and other tracking technologies to improve your experience on this site. We also link to content on external websites which may also gather information about you when you visit them. This is all perfectly normal. You can find out more about cookies (including how to turn them off) here and you can read our Privacy Policy here.