VCV Rack encoders plug-in released

We're delighted to announce that a plug-in is now available for VCV Rack to allow direct use of the ES-40, ES-5, ESX-8GT and ESX-8CV from within Rack itself.

The plug-in can be downloaded from the Rack plug-in manager in the usual way. It's free (as in beer).



New versions of ES-3, ES-5, ES-6 & ESX-8GT

NAMM 2017 - we are happy to announce new versions of four of our interfacing modules - the ES-3 mk4, the ES-5 mk3, the ES-6 mk2 and the ESX-8GT mk3.

All have been updated with self-illuminated jack sockets (as seen on the disting and ES-8), and are in general less deep. Otherwise functionality, and price, remains the same as the previous versions.

All are expected to be available February 2017.
February 2017 module refresh

Expert Sleepers Workshop at Rough Trade East

On June 1st Expert Sleepers conducted a workshop at the Schneidersladen Testsalon (in the Rough Trade East music store in East London).

We videoed it, but sadly this is a single static camera pointed at the presenter - no view of the modular or screencast from the laptop. Still, if you want a general spoken overview of the Expert Sleepers software and hardware, as a change from reading specs or reviews, you could do worse than watch some of this.

Part 1. Subjects covered include:
- Basic software usage with a DC-coupled interface.
- Use of the ES-3 for audio.
- Use of the Voice Controller plug-in with the ES-3 module.
- Silent Way LFO and Step LFO plug-ins.
- Silent Way Quantizer & calibration files.


Part 2. Subjects covered include:
- The expander modules (ES-5, ESX-8GT, ESX-4CV).
- Using the expanders to trigger drum modules.
- Silent Way Sync.
- The input modules (ES-6 & 7).
- Recording and processing CVs in the computer.
- Polyphony.
- Max/MSP externals.

Max/MSP externals now available

We’re happy to announce the first Expert Sleepers Max/MSP externals. These native Max objects support the ES-4, ES-5 and ESX-4CV modules, so it is no longer necessary to use the Silent Way plug-ins to drive these modules from Max.

Download now from the downloads page.


Two new Silent Way v2 reviews

Silent Way v2 has received two glowing reviews recently.

Computer Music magazine (issue CM186) gave Silent Way five out of five stars in their review:

It takes a lot to blow our minds, but Expert Sleepers has done it again. If you own a modular hardware synth and you don't have Silent Way, you simply aren't getting the most out of your hardware. It's one of the most spectacularly useful pieces of music software ever made.


Sound On Sound have published a very thorough review in their January 2013 issue:

The control voltages generated by the software are, however, sample-accurate, and I found the sense of ‘connection’ with my old synths tangibly better when playing them in real time using Silent Way, as opposed to through my MIDI interface and a MIDI-to-CV converter. A few recordings proved that the synths were much quicker to respond and more consistent in timing. I typically have to audio-quantise analogue bass sequences to get them as tight as I like, but those generated by Silent Way needed no quantisation to feel solidly nailed to the beat.


MIDI & DINsync adaptor cables now available

Pre-built adaptor cables for connecting MIDI and DINsync cables to the ES-5 or ESX-8GT (aka the ES-4 Gate Expander) are now available to buy direct from the Expert Sleepers store.

IMG_6474IMG_6472


Module Overview page added

We’ve added a ‘Module Overview’ page to the site, to give a quick comparison of the various Expert Sleepers CV interface modules. If you’re unsure which is the right choice for you, this would be a good place to start.

Module Overview page added

We’ve added a ‘Module Overview’ page to the site, to give a quick comparison of the various Expert Sleepers CV interface modules. If you’re unsure which is the right choice for you, this would be a good place to start.

ES-5 "ES-3 Expander" module now available

The ES-5 module, which adds extensive expansion options to the popular ES-3 module, is now available. Please check the Where To Buy page for links to retailers who stock Expert Sleepers hardware.

Expert Sleepers ES-5Expert Sleepers ES-5

Announcing the ES-5 "ES-3 Expander"

We’re pleased to announce the ES-5, an expansion module for the Expert Sleepers ES-3 Lightpipe/CV Interface.

It piggybacks on one of the ES-3's stereo channels to provide eight gate/clock/sync/MIDI outputs on the ES-5 itself, plus further expansion headers to connect up to five ES-4 Gate Expanders.

Expected to be available late March 2012.

ES-5 (ES-3 expander)

We use cookies and other tracking technologies to improve your experience on this site. We also link to content on external websites which may also gather information about you when you visit them. This is all perfectly normal. You can find out more about cookies (including how to turn them off) here and you can read our Privacy Policy here.